Futronic FS84 ethernet Fingerprint Authentication Module (eFAM)
combines both high performance fingerprint scanner and recognition
engine into one device. It has internal memory that can store up to
2500 fingerprint templates.
Any host system can control the FS84 via standard Ethernet interface
to enroll finger and recognize finger. The recognition result will be
sent from FS84 to the host.
4 wires serial interface is also available. So FS84 can be used for
both embedded and remote fingerprint recognition application.
Fingerprint images and templates can be transferred between FS84 and
host system via serial and ethernet interface.
FS84 has 1 output channel (for external relay control) and 2 input
channels (for door sensor and switch). So it can be used as a
fingerprint access control device.
Futronic provides development tools to customer free of charge for
integrating the FS84 with any host system.
Futronic FS84 Ethernet Fingerprint Module Features
(1) These operating systems are supported by Neurotechnology
Light source: Infrared LED
4 wires serial interface, VCC, GND, TX and RX. Speed up to
Ethernet communication speed: 10M
Supply voltage: 12V. Max current consumption: 250mA
1 output and 2 input channels for controlling external devices
2 output channels for controlling external LEDs
ESD: contact 8KV and air discharge 16KV no permanent damage
The Futronic FS88 USB 2.0 Reader is compatible with many different
development kits and applications. Below is the list of products
that are currently known to support this scanner. Please note
that some applications and development kits require specific versions
of the drivers to be installed. Please contact us if you need