Futronic's FS89 Fingerprint Module (Formerly FS88 OEM module) is an enhanced version of FS80
fingerprint scanner. The FS88/89 was certified by FBI to be
compliant with
PIV-071006 Image Quality Specification for Single Finger Reader. The
scanner is also listed in the US General Services Administration (GSA)
FIPS 201 Evaluation Program Approved Product List. The FS88 meets the
US Federal Information Processing Standard 201 (FIPS 201) for Personal
Identification Verification (PIV) of Federal Employees and Contractors.
The scanner is suitable for high-traffic applications like border
control, identity card, driver license, election or any other type of
civilian AFIS, as it is able to capture high quality fingerprint images
almost without distortions and has a rugged sensor.
FS89 module is available for customers who want to integrate FS88
into their own products, such as handheld POS machine, portable voter
registration station, etc. FS89 module is same as FS88 but
without plastic shell and USB cable so that it can be embedded into any
target system. It is even smaller and lighter:
Futronic FS89 FIPS201/PIV Fingerprint Module Features
-
FIPS 201 and PIV compliant – certified by FBI
and included in US General Services Administration approved products
list.
-
Suitable for mobile solutions – compact and
rugged sensor can be used in various high-traffic environments.
-
Precise optics – allow to scan almost
undistorted fingerprint image.
-
Infra-red illumination – allows to scan wet,
dry, blurred and other problematic fingers.
-
Rugged sensor – thick (14 mm) crown glass used
for platen.
Tech Specs
|
Scanner
Name
|
FS89 FIPS201/PIV Fingerprint
Module
|
|
Manufacturer
|
Futronic Technology Co. Ltd.
|
|
Connection
|
USB 2.0
|
|
Manufacturer
Supported OS
|
- Windows XP/2003, 32 bit and 64 bit
- Windows Vista/2008/2012, 32 bit and 64 bit
- Windows 7/8, 32 bit and 64 bit
- Linux with kernel 2.4 or higher (for both x86 and ARM9)
- Windows CE 5.0 and 6.0 (for both x86 and ARM9)
- Android 3.1 and higher with USB Host port
|
|
Neurotechnology
Supported
OS
(1)
|
- Microsoft Windows (32bit and
64bit)
- Linux (32bit)
|
|
Resolution
|
500 dpi
|
Fingerprint
Capture
Method
|
Touch
|
|
Image capture
area (Platen size)
|
16 x 24 mm (0.6" x 0.9")
|
|
Fingerprint image
size
|
320 x 480 pixels
|
|
Sensor type
|
Optical, CMOS
|
|
Illumination
|
Infrared LEDs
|
|
Device size
|
45 x 55 x 20 mm (1.8" x 2.2" x 0.8")
|
|
Device weight
|
80 grams (0.2 lbs)
|
|
Operating
temperature
|
-10°C ~ +55°C
|
(1) These operating systems are supported by Neurotechnology
SDKs.
Electrical characteristics
- Light source: Infrared LED
- Supply voltage: DC 4.5-5.5V via USB port
- Power consumption:
- active <700mW(during scanning)
- standby <200mW(when scanner is connected PC but no
scanning)
- sleep mode <12.5mW(activated by standard USB bus event
only)
- ESD contact - 8KV and air discharge - 16KV, no permanent damage
Product Compatibility
The Futronic FS88 USB 2.0 Reader is compatible with many different
software
development kits and applications. Below is the list of products
that are currently known to support this scanner. Please note
that some applications and development kits require specific versions
of the drivers to be installed. Please contact us if you need
additional information.
Supported Software Development Kits:
VeriFinger Standard and Extended SDK
MegaMatcher Standard and Extended SDK
Supported Applications:
FbF
(TM) Device Listener
