| Fingerprint Sensor Type |
FAP10 Capacitive Sensor |
| Pixel Resolution |
500 dpi +/- 2% |
| Platen size |
12.8mm x 18mm |
| Image Size |
256 x 360 Pixels |
| Image Grayscale |
256 Gray Level (8 - Bit Image) |
| Maximum Acquisition Time (Placement to Template) |
< 2 sec |
| FRR & FAR |
< 0.1% & < 0.001% |
| Module Approx. Dimension (L x W x H) |
35mm X 23mm X 5mm |
| Device Approx. Dimension (L x W x H) |
58.1mm x 33.3mm x 12mm |
| Approx Weight |
0.040 Kg |
| Capture mode |
Auto Finger detection functionality & Auto capture with built-in quality check (Incorporates NIST quality considerations) |
| Latent Finger Detection |
Supported |
| MTBF |
50000 Hours |
| Wear & Tear cycle of sensor |
1 Million |
| Cross Cut |
5B |
| Surface Hardness |
7H |
| SALT Spray Test |
IEC 60068-2-11/IS 9844/ASTM G 85 |
| Protocol |
USB2.0 , SPI (Up to 24 Mbps)* , UART (Baud Rate- Default 9600, Up to 115200)* |
| Connector |
Product: USB Type-A Male, Module: Wire to Board ** |
| Operating Voltage |
+5.0V ±5% (USB/UART Powered Device)
: +3.3V±3% (Only for SPI Powered Device) |
| Current Consumptions |
Operating Current: < 50 mA & Standby Current : < 30 mA |
| Operating Temperature |
-10°C to +70°C |
| Storage Temperature |
-20°C to +85°C |
| Humidity (Operating / Storage) |
< 90% RH, Non-condensing |
| Humidity (Operating / Storage) |
< 90% RH, Non-condensing |
| Biometric Data Interchange Format |
ISO 19794-2 : 2005 & 2011 and ANSI 378
: ISO 19794-4 : 2005 & 2011, WSQ3.1 |
| EMI / EMC Compliance |
CE & FCC Part 15B class A |
| ESD protection |
Contact Discharge: +/- 8kV, Air Discharge: +/- 15kV |
| Environmental, Health and Safety |
RoHS |
| Safety |
EN/IEC 62368-1, IS 13252 (Part 1) |
| Image Quality |
FBI PIV Certification, Mobile-ID FAP10 |
| IP Rating |
IP54 (Device Level), IP67 (Platen Area) |
| Device Driver |
WHQL certified driver |
| Operating System |
Windows 7, 10 & 11, Android & Linux |
| Standard Software/SDK |
1:1 Matching: MORFIN_AUTH,
: 1:N Matching: MORFIN _SEARCH |
